THE DEVELOPMENT OF A UNIVERSAL CORROSION INHIBITOR

Volume 8 (4), September 2021, Pages 23-28

1Lala Haciyeva, 2Mehin Baghirova


1Assistant professor, Department of  “Industrial Machines”, Azerbaijan State Oil and Industry University, Candidate of Technical Sciences, Azerbaijan. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

2Associate professor, Department of  “Industrial Machines”, Azerbaijan State University of Oil and Industry, Candidate of Technical Sciences, Azerbaijan. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.


ABSTRACT

In the article, in order to eliminate of the corrosion process, a universal bactericidal inhibitor was developed, based on the condensation products of aminoethylethanolamine and fatty acids. The bactericidal properties of the developed inhibitor were investigated. In wells operated on offshore platforms of O.G.E.O. on May 28, SOCSR carried out chemical and microbiological analysis of formation waters. The number of bactericidal cells of the investigated inhibitor and their vital activity indicate the bactericidal effect of its organizing advantage.

The topic posed in this article is topical and has great theoretical and practical importance.

An inhibiting composition has been developed, obtained on the basis of processing the residue of condensation products of aminoethylethanolamine and fatty acids, which have high inhibitory properties in model solutions.

The optimal conditions for the synthesis of this inhibitor have been determined.

The inhibiting properties of the composition of the new series, moreover, with a different composition in hydrogen sulfide media of oil fields of formation waters, imitating siphate-reducing bacteria, with respect to the bactericidal effect, have been established.

Keywords: corrosion, oilfield equipment, inhibitor protection, aggressive protection, aggressive environment, hydrogen sulfide, carbon dioxide, oxygen, carbonate, dispersed particle.

STUDY OF THE OPERATING COLUMN IN LOCATION INSTALLATION OF THE ANCHOR DEVICE

Volume 8 (4), September 2021, Pages 17-22

Sevinc Abasova


Assistant professor,  Department of  “Industrial Machines”, Azerbaijan State Oil and Industry University, Candidate of Technical Sciences,  Azerbaijan. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.http://orcid.org/0000-0002-7531-3429


ABSTRACT

The article discusses the stress state of the casing at the site of anchoring with anchor devices, the solutions of the problem are used. In the column, in interaction with the teeth of the anchor device rams, tangential and radial stresses are determined.

Keywords: design and technological parameters, equipment, analytical calculations, anchor device, design scheme.

RESULTS OF THE APPLICATION OF NEW TECHNOLOGIES IN INCREASING RESOURCES IN HIGH PRESSURE DRILLS

Volume 8 (4), September 2021, Pages 10-16

1Elman Aliyev, 2Zohra Garayeva


1Deputy director, R. L. "Nanomaterials and Nanotechnology",  Azerbaijan State Oil and Industry University, Doctor of economic science, Azerbaijan.

2Assistant, “Industrial Machines”, Azerbaijan State Oil and Industry University, Azerbaijan. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. https://orcid.org/0000-0001-8824-623X


ABSTRACT

In oilfield practice, as well as in the transportation of oil and gas, great importance is attached to the use of high-pressure valves. Since the demand for this fleet of equipment is growing, it is especially important to increase their resources and reduce their cost on this basis. Along with the constructive and technical measures taken in this direction, serious attention should be paid to improving the choice of materials for the manufacture of parts and their production technology.

The article is devoted to the discussion of the results obtained when using the coquille technology for the manufacture of parts made of low-alloy chromium-molybdenum steel.

Keywords: high-pressure gate valve, body, gate, seat, hardness, wear.

COMPRESSION OF OIL THROUGH A SOLUTION-AIR MIXTURE EFFECT OF INJECTION COEFFICIENT

Volume 7 (3), June 2021, Pages 82-86

1Aliyev  Elshan, 2Qasimli Azar, 3Baghirov Ayaz


1Deputy Director for General Affairs, “Geotechnological problems of oil and gas and chemistry” Scientific research Institute, Doctor of Philosophy in Technology, Docent, Azerbaijan.

2Head  researcher, “Geotechnological problems of oil and gas and chemistry” Scientific research Institute, Doctor of technical science, Azerbaijan.

3Superior, “Siyəzənneft” NQÇİ, Azerbaijan.


ABSTARCT                                           

 The article examines the dependence of the oil extraction coefficient on the injection coefficient during the compaction of oil from the porous medium in relation to the solution-air mixture. Based on the experiments, it was determined that the bulk of the residual oil from the aquifer can be obtained at a value of 0.6 injection coefficient.

Keywords: injection coefficient, air-solution mixture, lay’s water, air-water mixture, oil saturation.

IN TRIBOTECHNICAL UNITS MECHANICAL PROCESSES

Volume 8 (4), September 2021, Pages 04-09

Jamaladdin Aslanov


 The head of the department, “Industrial machines” department, Azerbaijan State Oil and Industry University, doctor of technical sciences, Azerbaijan.

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.


ABSTRACT

The study examined the diffusion phenomenon caused by compressive forces in tribotechnical nodes adhering to each other under high contact pressure and the mechanism of rupture of surfaces during surface fatigue. As a result, for two metal surfaces, depending on the nature of the touch, the gravitational and repulsive forces generated during the interaction in any environment are determined based on the number of touches and an analytical expression is obtained to calculate them.

Keywords: tribotechnical knot, mutual contact, diffusion phenomenon, surface attraction, molecular contact, mechanical contact.

Volume 7, Issue 3 (June 2021)