IMPROVEMENT OF THE OPERATION PROCESS OF WATERED DEEP OIL PUMP WELLS BY APPLICATION OF POLYFUNCTIONAL MEASURES

Details
Category: Uncategorised
Published: Monday, 07 June 2021 19:19
Written by Administrator
Hits: 2056

Volume 7 (3), June 2021, Pages 23-34

1Vaqif Gurbanov, 2Safa Mustafayev, 3Zuleykha Eyvazova,

4Farhad Bayramov, 5Nariman Mustafayev

1Deputy Director for Scientific Affairs, ANAS Institute of Oil and Gas, doctor of sciences, Azerbaijan.

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

2Dosent, “Industrial machines” department, Azerbaijan State Oil and Industry University, PhD in Technical Sciences,Azerbaijan. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

3Dosent, “Industrial machines” department, Azerbaijan State Oil and Industry University, PhD in Technical Sciences, Azerbaijan.  E-mail:This email address is being protected from spambots. You need JavaScript enabled to view it..  https://orcid.org/0000-0002-1239-4567

4Dosent, “Industrial machines” department, Azerbaijan State Oil and Industry University, PhD in Technical Sciences, Azerbaijan.  E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

ABSTRACT

 The article shows the types of complications that occur mainly in the fields of the Absheron archipelago in Azerbaijan and in the oil fields of the Azerbaijani sector of the Caspian Sea; the most common and frequent of them are the watering of the production of sucker rod pumping wells and the intensity of sand manifestations.

It is noted that methods that prevent complications or reduce their negative impact are more appropriate than methods for their elimination.

It is proposed to isolate formation water in flooded sucker-rod pumping oil wells using a universal hydrodynamic method; In this method, a liquid barrier should be created in front of the water in the formation, and not a solid barrier, and high-viscosity dead (non-gaseous) oil should be taken as a separating fluid, the specific gravity of which should be equal to the specific gravity of the formation water.

The article uses the following five functions of multifunctional measures when carrying out various well survey methods:

  1. Pouring clean fluid into the annulus to increase the amount of fluid in the wellbore and reduce the concentration of sand particles in it.
  2. Without stopping the operation of the pumping unit, adding clean oil to the annulus with the help of a unit, raise its static level several meters higher.

III. Determination of values of Pk, DPo and G in rod deep well pumping wells producing viscous-plastic oil without stopping the operation of the pumping unit.

  1. To determine the reservoir pressure in the simplest way, all well production is drained with a hose into the annulus.
  2. When removing the first lower curve by the method of two-sided restoration of curves without stopping the operation of the pumping unit
  3. VI. When applying the extraction method without changing the indicator diagrams S and n of water-cut oil wells.

Thus, the use of multifunctional measures improves the performance of the considered wells and provides great economic benefits.

Keywords: polyfunctional measure, irrigated well, sand manifestation, corrosion, erosion, wear, complication, pipe space, sand concentration in liquid, recovery curve.