THE STUDY OF PHYSICAL AND MECHANICAL PROPERTIES OF PACKERS' CUFFS

Details
Category: Uncategorised
Published: Monday, 25 January 2021 18:30
Written by Administrator
Hits: 2326

Volume 5 (1), January 2021, Pages 64-67

1Zenfira Huseynli, 2Elkhan Nazarov

1Azerbaijan State of Oil and Industry University, PhD in Technical Sciences. (Azerbaijan).

2Azerbaijan State Oil and Industry University, Master. (Azerbaijan).

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 Аbstract

In the drilling of wells, cementing of protective pipelines, development of productive horizons, as well as in operation, wells need to be divided into permanent or temporary areas. More advanced than these processes is the use of packing devices in the technological separation of layers and the insulation of protective belts. For example, delivery of the buffer mixture to the absorption zone by packer-mounted drill pipes saves 40-60% of time and reduces material consumption by 1.5-2 times compared to previous non-packer technologies.

Keywords: packer, cuff, protective pipeline, sliding, sealing.

STUDY OF DESIGN FEATURES AND MAIN CAUSES OF VALVE FAILURES IN RECIPROCATING COMPRESSORS

Details
Category: Uncategorised
Published: Monday, 25 January 2021 18:26
Written by Administrator
Hits: 2287

Volume 5 (1), January 2021, Pages 60-63

Natig Seyidakhmedov

Azerbaijan State Scientific Research Institute. Labor Protection and Safety Engineering.

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 Аbstract

At present, the compressor industry of the oil sector of Azerbaijan is one of its leading links. If by the end of the 20th century the number of wells using the gas-lift method of production was about 42-46%, then by the end of 2019 it exceeded the 50% level. Compressors are an integral part of this technological process and require a strict improvement in the technical level of their safe operation. Therefore, improving the technical and economic performance of the compressor unit is an important task. This work is devoted to the study of design features and the main causes of valve failures in reciprocating compressors, as well as an assessment of their safe operation.

Keywords: reciprocating compressor, reliability, valve, safety, gas-lift extraction method.

RESEARCH OF THE TECHNOLOGY OF OPENING HOLES IN COMPACT AND POWDER MATERIALS

Details
Category: Uncategorised
Published: Monday, 25 January 2021 18:22
Written by Administrator
Hits: 2352

Volume 5 (1), January 2021, Pages 51-59

1Heybet Eldarzade, 2Aghali Quliyev, 3Aynur Sherifova, 4Rafiqa Shahmarova, 5Tamilla Xankishiyeva

1,2Azerbaijan State Oil and Industry University, Candidate of Technical Sciences, Associate professor. (Azerbaijan).

3,4,5Azerbaijan State Oil and Industry University, Asistent.

3,5PhD in Technical Sciences, (Azerbaijan)

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 Аbstract

This article is devoted to one of the important problems of mechanical engineering, including processing by cutting and deploying in sintered antifriction powder material in optimal modes with maximum performance. The study was conducted for small diameter cylindrical bushings. Processing of bushings was carried out by reamers from high-speed and carbide tools on materials from porous powder and cast iron. It is established that the temperature of the tools should not exceed the permissible upper limits, for pressing the bushings, it is necessary to use planting with small strains in the cold state.

Keywords: engine valve, bushing, powder material, cast iron, reamer, cold pressing.

INCREMENTEL OF RELIABILITY OF OIL PUMPS’S HYDRAULIC SECTIONS

Details
Category: Uncategorised
Published: Monday, 25 January 2021 18:06
Written by Administrator
Hits: 2152

Volume 5 (1), January 2021, Pages 42-46

1Ibrahim Habibov, 2Gulnaz Rzayeva, 3Javidan Veliev

1Azerbaijan State Oil and Industry University, Doctor of Technical Sciences, Professor. (Azerbaijan)

2Azerbaijan State Oil and Industry University, PhD in Technical Sciences, Associate professor. (Azerbaijan)

3Azerbaijan State Oil and Industry University, Master. (Azerbaijan)

E-mail: 1This email address is being protected from spambots. You need JavaScript enabled to view it.; 2This email address is being protected from spambots. You need JavaScript enabled to view it.

 Аbstract

Present days’ high market competitiveness requires wide range of design and production solutions to ensure reliable and efficient usage of various types of machines and equipment. From the different perspective provision of equipment with effective preservation and maintenance characteristics is a critical factor to be taken into an account. Arising from these factors, systematic approach for solution is require together with identification failure related to maintenance and operability of the equipment. Various pumps are used in oilfields and particularly their hydraulic parts are among the equipment sets, requires frequent execution of maintenance and modernization works. The article discusses the issue of increasing the reliability of the hydraulic part of oil field pumps.

Keywords: oilfield pump, hydraulic part, reliability, modernization, parameters of statistical distribution.

INFLUENCE OF HOLDING TIME WITHOUT PRESSURE IN THE MANUFACTURE OF PLASTIC DETAILS OPERATING IN OIL FIELD EQUIPMENT

Details
Category: Uncategorised
Published: Monday, 25 January 2021 18:11
Written by Administrator
Hits: 2298

Volume 5 (1), January 2021, Pages 47-50

1Naila Gasanova, 2Vafa Pashayeva

1Azerbaijan State Oil and Industry University, PhD in Technical Sciences, Associate professor. (Azerbaijan)

2Azerbaijan State Oil and Industry University, Assistant. (Azerbaijan)

E-mail: 1This email address is being protected from spambots. You need JavaScript enabled to view it.

 Аbstract

When manufacturing technologically complex details from polymer materials, it is possible to achieve the necessary quality with the control of production regimes depending on the grade of the materials and the design of the manufactured details. In this article, the influence of holding time without pressure in the manufacture of plastic details operating in oil field equipment was investigated.

Keywords: parts made of plastic materials, press molds, technological regimes, delay time without pressure, quality indicators.

DYNAMICS OF IMPACT OF ABRASIVES ON GEARS ON TEETH

Details
Category: Uncategorised
Published: Monday, 25 January 2021 17:57
Written by Administrator
Hits: 2221

Volume 5 (1), January 2021, Pages 38-41

Nazim Ibrahimov

Azerbaijan State Oil and Industry University, Doctor of Technical Sciences, Professor. (Azerbaijan).

E-mail: nazim.ibragimov.2015 @mail.ru

 Аbstract

This article discusses the effect of abrasive between the leading and the driven gear teeth on the formation of a stress state. In this case, normal and tangential stresses are calculated under the action of normal and tangential forces.

Keywords: gears, abrasives, normal and tangential stresses, segmented shapes, fracture limit, wear depth.

More Articles ...

  1. COMPARATIVE EVALUATION OF RESISTANCE OF HEATING EXCHANGE APPARATUS FOR NEW CONSTRUCTIONS FOR GAS COMPRESSOR STATIONS
  2. MODELING THE HARDNESS AND POROSITY OF BRAKE PAD MATERIALS
  3. DETERMINATION OF THE RELATIONSHIP BETWEEN THE WEAR RATE OF GRINDING BALLS IN THE SAG MILL MILL AND THE PARAMETERS THAT CONTROL THE PROCESS
  4. CYCLIC TORSION WITH INTERNAL PRESSURE OF PRE-STRETCHED THINWALLED CYLINDERS