RESEARCH OF WEAR DURING FRICTION OF THE CUTTING PART OF THE WEEL MILL
- Details
- Category: Uncategorised
- Published: Sunday, 04 April 2021 20:50
- Written by Administrator
- Hits: 2181
Volume 6 (2), April 2021, Pages 73-75
1Mehin Baghirova, 2Farhad Guliyev
1Associate professor, Department of Oil and Gas Equipment, Azerbaijan State University of Oil and Industry, Candidate of Technical Sciences, Azerbaijan. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
2Master, Azerbaijan State University of Oil and Industry, Azerbaijan. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract
Depending on the severity of the accidents, repairs are carried out in the boreholes, mainly through the destruction of accident facilities. A widespread variation of this method is the continuous removal of a thin layer of metal shavings from an accident body, followed by the process of removing the crushed rock mass to the surface with a washing-cooling liquid called milling. Milling processes (for example, pump-compressor pipes, pump rods, etc.) are very complex in nature and are accompanied by a variety of physical phenomena, the mathematical description of which (especially the processes of friction and wear) is very difficult.
Keywords: milling, cutting process, dimensionless combination, limit torque.